HMI Pad Forums Old forum Common Support Requests (old) 2 PLC on the same network

This topic contains 1 reply, has 1 voice, and was last updated by  John 6 years, 6 months ago. This post has been viewed 1198 times

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #20052

    John
    Keymaster

      Two plc on the same network.
      Plc 1 controls the pumps
      Plc 2 controls the display for those pumps.
      How do I get the 2 buttons on the same page?

      #20053

      John
      Keymaster

        Follow these steps.

        1 – Create a separate csv file for each PLC and add relevant communication settings to these files (like ‘local_ip’ and ‘remote_host’)
        2 – Use the exact page name on both files, such as page=”Pumps”;
        3 – Import both files to SM or i-Boat and select both of them on the files tab.

        You should now have data from your two PLCs displayed on a single page named “Pumps”

        Thanks.

      Viewing 2 posts - 1 through 2 (of 2 total)

      You must be logged in to reply to this topic.

      Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
      Science and Technology Park of the University of Girona, Emili Grahit, 91 (NarcĂ­s Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244