This topic contains 1 reply, has 2 voices, and was last updated by  John 4 years, 4 months ago. This post has been viewed 1481 times

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #21621

    jaccov
    Participant

      I tried to use the Barcode style, but the camera on the iphone will not start.
      Who can help me.

      This is the code.
      BarcodeRead,CHAR[6],D12000,”page=”"Barcode / RFID”";local_ip:=”"192.168.2.16″”;ord=1;section=”"Scan Barcode”";style=”"barcode”";label=”"Barcode nummer”";comment=”"”";access=3;write_access=9;”

      • This topic was modified 4 years, 4 months ago by  jaccov.
      #21623

      John
      Keymaster

        Hello Jacov. The ScadaMobile app is no longer under development. At some time Apple replaced APIS for barcode scanner and that unfortunatelly broke the app, so the bar code scanner doesn’t longer works. I am sorry for the inconvenience. You can use the HMI Draw app instead for full functionality. Thanks.

      Viewing 2 posts - 1 through 2 (of 2 total)

      You must be logged in to reply to this topic.

      Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
      Science and Technology Park of the University of Girona, Emili Grahit, 91 (NarcĂ­s Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244