HMI Pad › Forums › Main Forums › HMI Pad Support › End of support HMI Pad?

This topic contains 13 replies, has 7 voices, and was last updated by  Dutch 3 years, 4 months ago. This post has been viewed 2872 times

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • 22 May, 2016 at 9:43 #21777

    Grzegorz
    Participant

      Do we have the end of the support and development of the HMIPad ?,
      For a long time a complete lack of activity creators of software.

      Thanks
      Grzegorz

      15 June, 2016 at 18:51 #21779

      RalphC
      Participant

        It would be a sad day, if HMIPad is dead.
        The timing couldn’t be worse, with the release of the IPad Pro.
        This panel, together with the speed of HMIPad, would make an unbeatable combination in the field.
        Hopefully we will get an answer soon.

        RalphC

        15 June, 2016 at 22:29 #21780

        John
        Keymaster

          Hi Ralph. I became ill about one year ago. My health issues are not currently life threatening but my condition has no cure and I am not longer able to continue development of the product. We are searching for a company which would be willing to further enhance the product. In the mean time Greg (GregM in the forums) is helping with giving support and looking for alternatives. I’m really sorry to have to leave this as I have a lot of ideas on the future direction of the product. Any suggestions about any interested third parties with REAL resources and willingness to take over this would be greatly appreciated. Thanks

          16 June, 2016 at 7:21 #21781

          Grzegorz
          Participant

            Hi John,

            This is a very sad message, I wish you health and I hope projek will go to the right company pipes which will further develop it.

            I greet and wish you health again
            Grzegorz

            16 June, 2016 at 8:15 #21782

            RalphC
            Participant

              John,
              Also wishing you the best for the future.
              It is imperative that you find someone to continue this development, the effort you’ve put in to an amazing piece of software, should’nt be allowed to go to waste.

              RalphC

              6 July, 2016 at 19:36 #21783

              Rafael
              Participant

                Hola John, es lamentable enterarnos por este medio sobre su salud actual. Te deseo que estes bien y seguir en contacto por el medio que mejor le parezca.

                Sobre la continuación del proyecto Hmi Pad, tambien me interesa mucho, estaremos al pendiente de los avisos o alternativas que tomen..

                Saludos!

                22 July, 2016 at 12:57 #21784

                Bryan.chiappelli@graftech.com
                Participant

                  You might talk to Rakesh or Sam At Parijat Controlware. Hang in there John…We’re praying for you.

                  22 July, 2016 at 12:58 #21785

                  Bryan.chiappelli@graftech.com
                  Participant

                    You might talk to Sam or Rakesh at Parijat Controlware. Hang in there John. We are praying for you.

                    24 October, 2016 at 19:24 #21788

                    baseboy
                    Participant

                      Very sad to read this news! Hope you getting well soon.

                      Regards,

                      Base

                      17 January, 2017 at 16:59 #21822

                      Dutch
                      Participant

                        Anyone know where we are these days?
                        Is it still possible to activate a program on HMI View?

                        thank you
                        dutch

                        19 January, 2017 at 4:58 #21823

                        Dutch
                        Participant

                          Joan,

                          If you are able, please respond.

                          19 January, 2017 at 5:02 #21824

                          Dutch
                          Participant

                            Greg M

                            I posted two messages, no response from anyone.

                            I need to supply a customer with an HMI View Program
                            Is this still possible?

                            The customer is a well to do local businessman with a software
                            company that might be interested in HMI Pad.

                            Please respond. If you wish, in private to:

                            dutch@wiredboat.com

                            19 January, 2017 at 11:20 #21825

                            Grzegorz
                            Participant

                              Please use Contact Form to communicate direct with John.

                              20 January, 2017 at 16:18 #21826

                              Dutch
                              Participant

                                Pardon me, should have said:

                                The customer is a well to do local businessman with a software
                                company that might be interested in the HMI Pad/View software
                                developement.

                                Anyone still in touch with Joan?

                                Thank you.

                              • Author
                                Posts
                              Viewing 14 posts - 1 through 14 (of 14 total)

                              You must be logged in to reply to this topic.

                              Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
                              Science and Technology Park of the University of Girona, Emili Grahit, 91 (Narcís Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244