HMI Pad Forums Main Forums General Enter numberField value

This topic contains 1 reply, has 2 voices, and was last updated by  gregM 4 years, 9 months ago. This post has been viewed 2350 times

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #21768


      How can I prevent a double digit value entered into a numberField from changing until the entire number is entered? For instance if a numberField is referenced by another field to be used for a controller set point you wouldn’t want it to use 5 if you are trying to enter 50.



        If you use numberfield.value the value that’s written to the Plc should be the value in the number field when the enter button is pressed.
        If you use numberfield.continuousValue then it’ll write the value any time a value is changed in the number field, even before pressing the enter button.

      Viewing 2 posts - 1 through 2 (of 2 total)

      You must be logged in to reply to this topic.

      Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
      Science and Technology Park of the University of Girona, Emili Grahit, 91 (NarcĂ­s Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244