HMI Pad Forums Main Forums ScadaMobile Support iOS7 – line strength – slider bar

This topic contains 2 replies, has 2 voices, and was last updated by  Hagemann 5 years, 9 months ago. This post has been viewed 758 times

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #19605

    Hagemann
    Member

      Is there a possibility to adjust the line strength of the sliders and bars under iOS7. The visibleness is unfortunately very limited compared to iOS6.

      #19606

      John
      Keymaster

        Hi, we are using the standard "progress" indicator as provided by Apple sdk. It has not an option for increasing width, so in order to improve on it we will need to create our own indicator. This should not imply a lot of work so we will look at what can be done. Thanks for your suggestion.

        #19607

        Hagemann
        Member

          Hi, that's good news.

          Under iOS6 you had implementsed a very good design for the indicators using a width of 18 dots (iPhone4). Now with iOS7 the indicators have a width of only 4 dots. The safari "progress" indicator shows a width of 5 dots.

          Could you please check also the hide/show function of the Navigation Bar. It seems that this function is not available under iOS7.

          Thanks a lot.

        Viewing 3 posts - 1 through 3 (of 3 total)

        You must be logged in to reply to this topic.

        Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
        Science and Technology Park of the University of Girona, Emili Grahit, 91 (NarcĂ­s Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244