HMI Pad Forums Old forum Common Support Requests (old) OPC compliant app to interface with and existing HMI?

This topic contains 1 reply, has 1 voice, and was last updated by  John 6 years, 6 months ago. This post has been viewed 1238 times

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #20054

    John
    Keymaster

      Any plans to make SCADAMobile OPC compliant to interface with and existing HMI? Thanks.

      #20055

      John
      Keymaster

        We do not have plans to support it, specially the ‘clasic’ OPC version. This technology strongly relies on legacy Microsoft technologies that are simply not available on the iOS platform.

        However if you talk about OPC UA, we could consider it in the future. Unfortunately, so far licensing terms are too expensive for us to just add it in our product, so most likely this will be offered as an add on with additional costs for users. Ultimately, the future availability of this will depend on user demand.

      Viewing 2 posts - 1 through 2 (of 2 total)

      You must be logged in to reply to this topic.

      Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
      Science and Technology Park of the University of Girona, Emili Grahit, 91 (NarcĂ­s Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244