HMI Pad Forums Main Forums HMI Pad Support Sending updated project to client/customer

This topic contains 2 replies, has 2 voices, and was last updated by  congo 3 years, 7 months ago. This post has been viewed 943 times

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #21760

    congo
    Participant

      How do you send an updated project to a client? The deployment manual says this:

      TIP: After you purchased an Activation Code you can still continue editing your project and re-upload it at any time without affecting the validity of their associated Activations. You will do this when you want to provide an update or bug fix for your project to your customers. When you do so you do not need to create or pay for another activation, as the existing one will continue to be valid for the same project.

      Please explain how and where to perform this from in HMi Draw. Thanks.

      #21761

      gregM
      Participant

        with the Project open in HMI Draw, click the three dots in the top left corner to open the HMI Draw Panel.
        hit the Hammer Icon (Project Name), click on “Activate”, then click “Upload Project”

        if the customer has it on His device, in HMI View, all he needs to to is click on the three dots in the top left, tap the Hammer Icon (Project Name), tap “Update”, tap “Update now”, then tap “Open”.

        the new project should now be open, the connections must be turned back on again for that project.

        • This reply was modified 3 years, 7 months ago by  gregM.
        #21763

        congo
        Participant

          That’s great, thanks for the explanation Greg.

        Viewing 3 posts - 1 through 3 (of 3 total)

        You must be logged in to reply to this topic.

        Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
        Science and Technology Park of the University of Girona, Emili Grahit, 91 (NarcĂ­s Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244