HMI Pad › Forums › Main Forums › ScadaMobile Support › slave_id attribute

This topic contains 1 reply, has 1 voice, and was last updated by  daneforsberg 5 years, 10 months ago. This post has been viewed 728 times

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 17 January, 2014 at 23:17 #19603

    daneforsberg
    Member

      I am having trouble setting the slave_id attribute equal to a variable. Does this attribute have to be a fixed value?

      Thanks for your help!

      Dane

      20 January, 2014 at 19:01 #19604

      John
      Keymaster

        Hi,

        This attribute does not support expressions, so you can only set constant values. You can find the attributes that support expressions on the ScadaMobile manual.
        [url]http://www.sweetwilliamsl.com/documentation/user-manuals/[/url]

        Thanks

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)

      You must be logged in to reply to this topic.

      Copyright © SweetWilliam, S.L 2009-2013. All rights reserved.
      Science and Technology Park of the University of Girona, Emili Grahit, 91 (Narcís Monturiol building, Office P3-B03) 17003-Girona. Phone +34972183244